Journal cover Journal topic
Natural Hazards and Earth System Sciences An interactive open-access journal of the European Geosciences Union
Nat. Hazards Earth Syst. Sci., 15, 1721-1739, 2015
http://www.nat-hazards-earth-syst-sci.net/15/1721/2015/
doi:10.5194/nhess-15-1721-2015
© Author(s) 2015. This work is distributed
under the Creative Commons Attribution 3.0 License.
Research article
04 Aug 2015
Towards predictive data-driven simulations of wildfire spread – Part II: Ensemble Kalman Filter for the state estimation of a front-tracking simulator of wildfire spread
M. C. Rochoux1,2,3,4, C. Emery1,2,5, S. Ricci1,2, B. Cuenot1, and A. Trouvé5 1CERFACS, 42 avenue Gaspard Coriolis, 31057 Toulouse, CEDEX 01, France
2SUC/CNRS-URA1875, 42 avenue Gaspard Coriolis, 31057 Toulouse, CEDEX 01, France
3Ecole Centrale Paris, Grande Voie des Vignes, 92295 Châtenay-Malabry, France
4EM2C/CNRS-UPR288, Grande Voie des Vignes, 92295 Châtenay-Malabry, France
5Dept. of Fire Protection Engineering, University of Maryland, College Park, Maryland, MD 20742, USA
Abstract. This paper is the second part in a series of two articles, which aims at presenting a data-driven modeling strategy for forecasting wildfire spread scenarios based on the assimilation of the observed fire front location and on the sequential correction of model parameters or model state. This model relies on an estimation of the local rate of fire spread (ROS) as a function of environmental conditions based on Rothermel's semi-empirical formulation, in order to propagate the fire front with an Eulerian front-tracking simulator. In Part I, a data assimilation (DA) system based on an ensemble Kalman filter (EnKF) was implemented to provide a spatially uniform correction of biomass fuel and wind parameters and thereby, produce an improved forecast of the wildfire behavior (addressing uncertainties in the input parameters of the ROS model only). In Part II, the objective of the EnKF algorithm is to sequentially update the two-dimensional coordinates of the markers along the discretized fire front, in order to provide a spatially distributed correction of the fire front location and thereby, a more reliable initial condition for further model time-integration (addressing all sources of uncertainties in the ROS model). The resulting prototype data-driven wildfire spread simulator is first evaluated in a series of verification tests using synthetically generated observations; tests include representative cases with spatially varying biomass properties and temporally varying wind conditions. In order to properly account for uncertainties during the EnKF update step and to accurately represent error correlations along the fireline, it is shown that members of the EnKF ensemble must be generated through variations in estimates of the fire's initial location as well as through variations in the parameters of the ROS model.

The performance of the prototype simulator based on state estimation (SE) or parameter estimation (PE) is then evaluated by comparison with data taken from a reduced-scale controlled grassland fire experiment. Results indicate that data-driven simulations are capable of correcting inaccurate predictions of the fire front location and of subsequently providing an optimized forecast of the wildfire behavior at future lead times. The complementary benefits of both PE and SE approaches, in terms of analysis and forecast performance, are also emphasized. In particular, it is found that the size of the assimilation window must be specified adequately with the persistence of the model initial condition and/or with the temporal and spatial variability of the environmental conditions in order to track sudden changes in wildfire behavior. The present prototype data-driven forecast system is still at an early stage of development. In this regard, this preliminary investigation provides valuable information on how to combine observations with a fire spread model in an efficient way, as well as guidelines to design the future system evolution in order to meet the operational requirements of wildfire spread monitoring.


Citation: Rochoux, M. C., Emery, C., Ricci, S., Cuenot, B., and Trouvé, A.: Towards predictive data-driven simulations of wildfire spread – Part II: Ensemble Kalman Filter for the state estimation of a front-tracking simulator of wildfire spread, Nat. Hazards Earth Syst. Sci., 15, 1721-1739, doi:10.5194/nhess-15-1721-2015, 2015.
Publications Copernicus
Short summary
This paper, the second part in a series of two articles, aims at presenting a data-driven modeling strategy for forecasting wildfire spread scenarios based on the assimilation of the observed fire front location and on the sequential correction of model parameters or model state. The objective here is to sequentially update the fire front location in order to provide a more reliable initial condition for further model integration and forecast.
This paper, the second part in a series of two articles, aims at presenting a data-driven...
Share