1State Key Laboratory of Simulation and Regulation of Water Cycle in
River Basin, China Institute of Water Resources and Hydropower Research,
Beijing, 100038, China
2State Key Laboratory of Hydrology-Water Resource and Hydraulic
Engineering, Hohai University, Nanjing, 210098, China
Received: 03 Nov 2016 – Discussion started: 06 Dec 2016
Abstract. The Weather Research and Forecasting (WRF) model is used in this study to simulate six storm events in two semi-humid catchments of northern China. The six storm events are classified into four types based on the rainfall evenness in the spatial and temporal dimensions. Two microphysics, two planetary boundary layers (PBL) and three cumulus parameterizations are combined to develop an ensemble containing 16 members for rainfall generation. The WRF model performs the best for type 1 events with relatively even distributions of rainfall in both space and time. The average relative error (ARE) for the cumulative rainfall amount is 15.82 %. For the spatial rainfall simulation, the lowest root mean square error (RMSE) is found with event II (0.4007), which has the most even spatial distribution, and for the temporal simulation the lowest RMSE is found with event I (1.0218), which has the most even temporal distribution. The most difficult to reproduce are found to be the very convective storms with uneven spatiotemporal distributions (type 4 event), and the average relative error for the cumulative rainfall amounts is up to 66.37 %. The RMSE results of event III, with the most uneven spatial and temporal distribution, are 0.9688 for the spatial simulation and 2.5327 for the temporal simulation, which are much higher than the other storms. The general performance of the current WRF physical parameterizations is discussed. The Betts–Miller–Janjic (BMJ) scheme is found to be unsuitable for rainfall simulation in the study sites. For type 1, 2 and 4 storms, member 4 performs the best. For type 3 storms, members 5 and 7 are the better choice. More guidance is provided for choosing among the physical parameterizations for accurate rainfall simulations of different storm types in the study area.
Revised: 17 Mar 2017 – Accepted: 23 Mar 2017 – Published: 13 Apr 2017
Tian, J., Liu, J., Yan, D., Li, C., and Yu, F.: Numerical rainfall simulation with different spatial and temporal evenness by using a WRF multiphysics ensemble, Nat. Hazards Earth Syst. Sci., 17, 563-579, doi:10.5194/nhess-17-563-2017, 2017.